top of page
RMBS.png

Phone:800-443-1395

​

Bingo Equipment Cleaning 

Recommended cleaning agents for the console and flashboard:
 
Bingo Equipment Cleaning is periodic servicing of your Bingo System and should include cleaning, polishing and light bulb replacement.
CAUTION:  Always unplug the console and flashboard before performing any type of maintenance

  • Use a mild soap solution or mild cleanser. Harsh cleansers or solvents may damage the paint or lettering. Follow with an automotive-style polish for additional protection.
     

     

    CAUTION: The front of the flashboard acrylic is a painted surface

  • Use only a mild soap solution such as liquid detergent with a clean soft cloth for best results and protection of the surfaces. Ammonia based cleaners may dull the acrylic.

  • Use a mild soap solution or window cleaner and a clean soft cloth. Do not use abrasive cleaners. Avoid excessive moisture and wipe dry. Do not clean while power is on.

  • Use a mild soap solution or mild cleanser. Harsh cleansers or solvents may damage the paint or lettering. Follow with an automotive-style polish for additional protection.

  • Clean with a mild soap solution such as a liquid detergent and warm water (not hot water). Harsh cleaners or solvents may damage finish or lettering. Dry the balls thoroughly using a towel. Insert towel-dried balls into a paper bag with a small amount of talcum powder, agitate the balls and shake off the excess powder.

  • Lightly spray anti-static aerosol compound over the blower base pan foam and inside the blower chamber windows to eliminate static.
     

    CAUTION: Be sure not to apply anti-static compound to the ball-catcher acrylic tube- this may cause the ball tube to shatter. Perform this treatment every few months or when you notice balls sticking together or to the windows.
     

    Inspect the anti-static tinsel surrounding the two side of the blower base pan assembly. If torn or worn, replace with Arrow Item No. # 41208 Anti-Static Tinsel.
     

    Use vacuum with wand attachment to clean ball chute and inside both cabinet doors.

  • Should you decide to change the appearance of the console, it may be done quickly and easily.
     

    Removing Laminate Panels:

    1. Remove the two screws securing each of the four trim pieces.

    2. Gently pull the laminate panels off allowing the Velcro to release starting at the top.

     

    Replacing Laminate Panels:

    1. Select proper piece, setting the bottom edge in place. Gently place top edge in place.

    2. Replace the four trim pieces

Mountain Landscape
RMBS.png

© 2025 Rocky Mountain Bingo Supplys

2300 S. Tejon Englewood, CO 80110
Phone: 800-443-1395
Email: rlemon@rockymountainbingo.com
Support: berfman@rockymountainbingo.com

bottom of page